Cabinet Solutions, Inc.

Opening a set of standards:

1. Enter the "Job Standards" window, either through the "Adjust Job Standards" button in the "Start-Up Screen" or through the "Adjust Job Standards" option in the menu bar.
2. Click on the word File in the menu bar of the Standards window.
3. In the drop down list that appears you will see an option to Open Standards, select this option.
4. In the list that appears, select the standards that you would like to open by clicking on the name once. It will appear in the top space of that list.
5. Click on the Open button.

These standards are now set as the Job Standards for this job. You can use these standards just as they are or you can change them if you need to for this job. This same process can be used to set the standards for individual cabinets as well. Just pick the individual cabinets you want to change and follow the above steps to give the cabinet a new standards file.

Notes:

1. The standards FF_FAC, and EURO_FAC, are the files for the Cabinet Solutions factory defaults. They only exist as samples to be used when experimenting with your new program.
2. Just because you click the Euro or Face Frame button in the "Job Standards" window, does not mean the corresponding standards file is loaded. You may still need to follow the steps above to load a specific standards file.